
Winner — Wales Energy Efficiency Awards 2026Boiler Installer & Heating Contractor of the Year
See Our Wales Award
Serving Pembroke • SA71 • Pembrokeshire
Pembroke pairs a historic town centre with residential areas and rural approaches towards Tenby and Haverfordwest. Local properties vary widely in age and construction, so an effective heating proposal should reflect measured demand, existing emitters and whether mains gas is available at the address. SwiftHeat UK offers boiler installation, servicing, repairs and heating-system assessments here. Send your full postcode so we can confirm availability for the work you need.

Winner — Wales Energy Efficiency Awards 2026Boiler Installer & Heating Contractor of the Year
See Our Wales Award
Special Commendation — UK National Energy Efficiency Awards 2026Boiler Installer & Heating Contractor of the Year
View certificate (opens in a new tab)See Our National RecognitionBoiler brands we install
Explore the ranges. We recommend the right boiler for your home following an assessment.
We treat the boiler as one part of the home. Pipework, emitters, controls and hot-water requirements are reviewed together so the recommendation makes sense for the complete system.
New boiler advice that balances reliable hot water, comfortable rooms, available space and long-term use.
Technical checks supported by plain-English advice on the sensible next step for the boiler and system.
Careful annual checks, operating measurements and practical advice on looking after the heating system between visits.
SwiftHeat UK Group Ltd · Whole-home thinking
One improvement or a longer-term plan: our expertise brings heating, electricity generation, storage and hot water into the same conversation. We assess your existing system, comfort, energy use and budget before recommending the next step.

Installation, servicing, fault diagnosis and system upgrades across gas, oil and LPG. We assess the appliance, fuel supply, pipework and controls together, with the appropriate specialists identified for the work.

Air source heat-pump planning considers room heat loss, radiators, hot water and outdoor space. Where suitable, we can compare a hybrid arrangement combining a heat pump with a compatible boiler and coordinated controls.

Explore rooftop solar, solar with storage, adding a compatible battery, and maintenance of existing systems. Roof condition, shading, seasonal generation, electricity use and tariffs shape the proposal.

Electric combi, system and suitable heat-only arrangements assessed around the heating circuit, hot-water demand, electrical capacity and running costs. We compare the complete proposal with other suitable heating options.

Hot-water cylinder assessment and replacement, direct electric unvented storage and compact electric heaters. We consider capacity, recovery, mains supply, available space and the requirements of the chosen installation.

Smart thermostats, TRVs, zoning, radiator upgrades and underfloor heating, with balancing and system cleaning where needed. We check compatibility and heat delivery so improvements suit the way you use your home.
One home. A connected energy plan.Bring heating, hot water, solar generation, battery storage and smart controls into one considered plan. We assess how suitable technologies can work together around your property, energy use and budget.
For enquiries around SA71, tell us your full postcode, existing fuel and equipment, and what you want to improve. We can consider suitable combinations or phase the work around your priorities. Availability, responsible installers, relevant certification and aftercare are confirmed in your proposal.
Solar output varies through the year. Batteries have limited capacity, and most homes retain a grid connection. Equipment compatibility, electrical capacity and expected running costs are checked before a combined system is recommended.
Pembroke homeowner heating guide
Pembroke's historic centre, stone-built homes and later residential areas create different heat-loss and installation constraints. Wall construction and service routes deserve early attention.
We assess the fabric, flue options and radiator capacity before choosing equipment, particularly where lower-temperature heating is being considered.
Heating-system assessments and upgrades · Radiator improvements · Heating controls
That local property context is considered alongside the boiler, controls, radiator circuit and hot-water pattern, so the advice for a Pembroke home is grounded in evidence rather than a standard package.
These approved photographs show genuine SwiftHeat UK diagnostics and installations. They are representative workmanship examples and are not presented as projects completed in Pembroke unless a separate case study below names the town and postcode district.
These are genuine SwiftHeat UK customer reviews. No location is attributed where the approved source does not provide one.
Recently had a boiler installed... absolutely amazing service,
Read more
I would highly recommend this company. Thank you so much 🙂
Brilliant service, new boiler all done, very respectable and very friendly.
Read more
Very very happy customer, would highly recommend them.
Our Work • Installation examples
Considering heating work in Pembroke? Explore examples completed elsewhere in South Wales. These are examples of our installation work, with each project's actual location clearly identified.

A new NCB300 28kW combi with magnetic filtration, a shock arrestor, complimentary thermostat and five-year manufacturer’s warranty.
View the Penarth, South Wales case study →
A Baxi 800 30kW combi with MagnaClean protection, complimentary wireless controls, ten-year manufacturer’s warranty and twelve-month installation guarantee.
View the Cardiff, South Wales case study →Send the full postcode, property type and any parking or access restrictions. The SA71 districts are a guide; we confirm the actual address and appointment availability.
Share the make, model and visible fault code if known, or a photograph taken safely without removing covers. Tell us whether you need servicing, fault diagnosis or an installation survey.
Tell us your current fuel, insulation, hot-water needs, available outdoor space and whether a hot-water cylinder is fitted. We assess room-by-room heat loss, radiator suitability and outdoor-unit siting before recommending a suitable system.
Read the heat-pump assessment guideFull information, one authoritative source
These concise summaries point to the central pages where current terms, qualifications and full service details are maintained.
Eligible boiler installations from SwiftHeat UK Group Ltd may have repayment options of 3 months, 6 months, 9 months or 12 months through Humm Group Limited. 0% finance is subject to eligibility, approval and provider terms. Any applicable deposit, fees, repayment conditions and total payable are explained during your enquiry/application. Review the terms supplied before applying.
Every home has a different route to lower-carbon heating. We review the existing system and expected demand, then help establish whether an air source heat pump merits a detailed MCS assessment. Current Boiler Upgrade Scheme support is subject to the property, technology, MCS and scheme eligibility rules.
The Boiler Upgrade Scheme offers £7,500 towards an eligible air-to-water heat pump in England or Wales. Qualifying homes currently heated by oil or LPG, with no mains-gas connection, may receive an additional £1,500 (£9,000 in total) until March 2027. An MCS-certified installer must confirm eligibility and apply on your behalf; approval is not guaranteed.

Running costs and any savings depend on the property, system design, controls and energy tariff.
SwiftHeat UK won Wales’ Boiler Installer & Heating Contractor of the Year 2026, alongside Highly Commended and Commended honours, and received a Special Commendation in the national Boiler & Heating Installer and Contractor of the Year category.
SwiftHeat UK Group Ltd is Disability Confident Committed. Eligible Cardiff City season-ticket holders can also receive 15% off qualifying new boiler installations and boiler servicing under the current published offer terms.
Local heating questions
Homes in SA71 are within the core focus of this page. Nearby enquiries from Pembroke Dock, Milford Haven, Tenby and Haverfordwest are also welcomed, subject to the type of work and the available appointment schedule.
Pembroke's historic centre, stone-built homes and later residential areas create different heat-loss and installation constraints. Wall construction and service routes deserve early attention. We assess the fabric, flue options and radiator capacity before choosing equipment, particularly where lower-temperature heating is being considered. Thick stone walls can hide complex service routes; agree pipework and flue paths before installation begins.
For a heating problem around Milford Haven, explain what is happening, when it started and which rooms or hot-water outlets are affected. That gives the team a useful starting point before a Pembroke appointment is agreed and avoids treating every symptom as an automatic boiler replacement.
For a Pembroke home, choose boiler servicing when a working appliance needs annual checks, diagnostics when there is a fault or loss of performance, and boiler installation when replacement is being considered. The central service pages linked above explain each route in full for customers around SA71.
Local service coverage
Our Pembroke service area is centred on SA71 and includes homes throughout Pembrokeshire, with nearby coverage around Pembroke Dock, Milford Haven, Tenby, Haverfordwest. If your location is not listed, contact us—SwiftHeat UK works across Wales and throughout the UK.
Browse all Areas We Cover →
Assess first. Recommend second.
Tell us what is happening at your Pembroke property and what outcome you want. Mention the boiler, controls or rooms affected; our team will review the detail and contact you with a sensible next step for your home in Pembrokeshire.